A Better Game

To date, most synthetic back yard putting surfaces are installed using
several inches and layers of sand fill to make the grass fibers stand up, thus
causing the putting surface to become very fast. These surfaces require
periodic broom sweeping to keep the fibers upright, and water-rolling to
keep the sand level.

Most of these synthetic turf surfaces have a grain pattern that runs one way
throughout the carpet, making the ball skip or hop across the grain; these
sand-filled greens also need periodic sand-fill and expensive top dressing.

To create a ball speed that is required of "tour greens", you need to fill the
turf fibers with sand and top dress right up to the top of the fibers. At that
point, you are putting almost entirely on sand and not the fibers. In time, the
sand will settle or wash out, and your sand-filled green will become much
slower.
NOTE: Most turf requiring sand-fill has Silica Sand. Silica is a known
Carcinogen with pending federal class action lawsuits.

Now, with the new Mirage Tour Putt™ Turf System, there is no need for
deep sand-fill or top dressing. Our new turf is designed "off the shelf" to putt
just like a Tour Green.

The Mirage Tour-Putt™ surface has Stimp speeds comparable to most PGA
greens, without using deep sand infill or top dressings. Our new turf fibers
have been manufactured to stand up naturally, and our turf has virtually no
grain, thus the ball rolls the same in all directions. The tips of the fibers
have been bent to simulate the true roll of a real bent grass green.

Need proof in person? Just give us a call and one of our representatives will
bring our putting surface right to your location, so you can actually putt on
it. Once you have putted on our Mirage Putting Green, you will be
convinced, it is the "most realistic maintenance-free synthetic putting
surface in the world."